Computer-Aided Design / Computer-Aided Manufacturing (CAD CAM) for O&P

This course introduces orthotics and prosthetics professionals to CAD/CAM workflows used to design, modify, and prepare digital models for fabrication. Through tool-based demonstrations and structured instructional content, learners build practical skills in applying model modifications, managing design features such a

Enroll in Computer-Aided Design / Computer-Aided Manufacturing (CAD CAM) for O&P

$49 one-time purchase. Review the outline, preview free sections, and continue to secure checkout when you're ready.

Buy Computer-Aided Design / Computer-Aided Manufacturing (CAD CAM) for O&P for $49

Course Details

  • Duration: 10h 1m
  • Level: intermediate
  • Category: Workforce Training
  • Price: $49.00

Course Modules

  1. Unit 1: 3rd Party Reviewer 1 Rubric CAD CAM Final
  2. Introduction to CAD/CAM for Orthotics and Prosthetics
  3. Fundamentals of AFO Design and Workflow
  4. Unit 2: 3rd Party Reviewer 2 Rubric CAD CAM Final
  5. Unit 3: AFO Add Material Tool.plain doc
  6. Using Add Material Tool in AFO Modeling
  7. Unit 4: AFO Anterior Opening Tool.plain doc
  8. Creating Anterior Opening for AFO Devices
  9. Capturing Patient Geometry for AFO Fabrication
  10. Unit 5: AFO Capture Tab.plain doc
  11. Unit 6: AFO Cut Plantar Surface Tool.plain doc
  12. Cutting the Plantar Surface in AFO Models
  13. Advanced AFO Design Techniques
  14. Unit 7: AFO Design Tab.plain doc
  15. Dorsal Opening Design in AFO
  16. Unit 8: AFO Dorsal Opening Tool.plain doc
  17. Unit 9: AFO Plantarflexion Dorsiflexion Tool.plain doc
  18. Adjusting Plantarflexion and Dorsiflexion in AFO
  19. Unit 10: AFO Pronation Supination Tool.plain doc
  20. Managing Pronation/Supination Adjustments in AFO
  21. Raising Lower Toes in AFO Modeling
  22. Unit 11: AFO Raise Lower Toes Tool.plain doc
  23. Material Removal Strategies for AFO
  24. Unit 12: AFO Remove Material Tool Foot Plate.plain doc
  25. Unit 13: AFO Remove Material Tool Global Reduction.plain doc
  26. Toe Box Modeling for AFO
  27. Unit 14: AFO Scanning Demo.plain doc
  28. Overview of FO Tools and Workflow
  29. Unit 15: AFO Toe Box Tool.plain doc
  30. Using FO Add Material and Remove Material Tools
  31. Anterior and Dorsal Opening Design in FO
  32. Unit 16: Accessibility Checkpoints: FUNDAMENTALS OF CAD/CAM TECHNOLOGY FOR ORTHOTICS AND PROSTHETICS PROGRAM OF STUDY.
  33. Designing Foot Orthoses with Capture and Cut Plantar Surface Tools
  34. Unit 17: FO Adding Material Tool.plain doc
  35. Integrating Plantarflexion/Dorsiflexion Adjustments in FO
  36. Unit 18: FO Capture Tab.plain doc
  37. Unit 19: FO DesignTab.plain doc
  38. Pronation/Supination Corrections in FO Design
  39. Unit 20: FO Raise Lower Toes Tool.plain doc
  40. Transtibial (TT) Socket CAD/CAM Overview
  41. Unit 21: FO Remove Material Tool TV Arch.plain doc
  42. Applying Add Material Tool for TT Socket Fabrication
  43. Unit 22: FO Remove Material Tool.plain doc
  44. Designing Anterior and Dorsal Openings for TT Sockets
  45. Unit 23: FO Supination Pronation Tool.plain doc
  46. Capture and Cut Tools for TT Socket Modeling
  47. Unit 24: FO Toe Box Tool.plain doc
  48. Managing Plantarflexion/Dorsiflexion in TT Sockets
  49. Transfemoral (TF) Socket CAD/CAM Workflow
  50. Unit 25: powerpoint cad cam
  51. Unit 26: word cad cam
  52. Using Add Material and Remove Material in TF Socket Design
  53. Anterior and Dorsal Opening Creation for TF Sockets
  54. Unit 27: OMEGA Carver Video.plain doc
  55. Adjusting Pronation/Supination in TF Socket Models
  56. Unit 28: TF Adjust Circumferences Tool TF Sockets.plain doc
  57. TLSO CAD/CAM Design Fundamentals
  58. Unit 29: TF Adjust M L Tool TF Sockets.plain doc
  59. Applying Capture and Cut Tools for TLSO Fabrication
  60. Unit 30: TF Caliper Tool TF Sockets by the Numbers.plain doc
  61. Integrating Adjustments for Plantarflexion/Dorsiflexion in TLSO
  62. Unit 31: TF Capture Tab TF by the Numbers.plain doc
  63. Unit 32: TF Change Length Tool TF Sockets.plain doc
  64. OMEGA CAD/CAM System: Setup and Interface
  65. OMEGA Tools: Add Material, Remove Material, and Design Utilities
  66. Unit 33: TF Design Tab.plain doc
  67. Central Fabrication and Workflow Optimization
  68. Unit 34: TF Remove Material Tool TF Sockets.plain doc
  69. Unit 35: TLSO Capture Tab.plain doc
  70. Foam Model Fabrication Techniques in CAD/CAM
  71. Unit 36: TLSO Design Tab.plain doc
  72. Unit 37: TLSO Scanning Demo.plain doc
  73. Unit 38: TT Adding Material Tool.plain doc
  74. Unit 39: TT BK Scanning Demo.plain doc
  75. Unit 40: TT Caliper Tool.plain doc
  76. Unit 41: TT Capture Tab.plain doc
  77. Unit 42: TT Cutting Plane Shelf Tool.plain doc
  78. Unit 43: TT Cutting Plane Tool.plain doc
  79. Unit 44: TT Design Tab.plain doc
  80. Unit 45: TT Narrow M L Tool.plain doc
  81. Unit 46: TT PTB Interosseous Modification.plain doc
  82. Unit 47: TT Remove Material Tool Soft Tissue.plain doc
  83. Unit 48: TT Remove Material Tool.plain doc
  84. Unit 49: TT Trimline Tool.plain doc 1
  85. Unit 50: cad cam reviewer 1 rubric
  86. Unit 51: cad cam reviewer 2 rubric
  87. Unit 52: Major Events in the Development of CAD/CAM Technology. To take full advantage of the learning opportunities presented in this resource, view the presentation in “Slide Show” mode. Click on the “Slide Show” tab in your Microsoft® PowerPoint® tool bar, then click on the “From the Beginning” tab. As an alternative, you may press the F5 key as a shortcut to begin the presentation.
  88. Unit 53: 21st Century
  89. Unit 54: CAD/CAM Companies and Systems for the Orthotics and Prosthetics (O&P) Industry—An Overview.
  90. Unit 55: To take full advantage of the learning opportunities presented in this resource, Internet access is recommended. Also, view the presentation in “Slide Show” mode. Click on the “Slide Show” tab in your Microsoft PowerPoint tool bar, then click on the “From the Beginning” tab. As an alternative, you may press the F5 key as a shortcut to begin the presentation.
  91. Unit 56: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  92. Unit 57: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  93. Unit 58: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  94. Unit 59: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  95. Unit 60: PROS and CONS of CAD/CAM TECHNOLOGY
  96. Unit 61: WELCOME TO MODULE ONE
  97. Unit 62: MODULE ONE LECTURE OUTLINE
  98. Unit 63: Foundations of CAD/CAM Technology for Orthotics and Prosthetics.
  99. Unit 64: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  100. Unit 65: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  101. Unit 67: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  102. Unit 68: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  103. Unit 69: The CAD/CAM System: Digital Scanning. To take full advantage of the learning opportunities presented in this resource, view the presentation in “Slide Show” mode. Click on the “Slide Show” tab in your Microsoft® PowerPoint® tool bar, then click on the “From the Beginning” tab. As an alternative, you may press the F5 key as a shortcut to begin the presentation.
  104. Unit 70: The CAD/CAM System: Digital Scanning
  105. Unit 71: The CAD/CAM System: OMEGA® Hardware.
  106. Unit 72: The CAD/CAM System: OMEGA® Hardware
  107. Unit 73: OMEGA® 2013 CAD/CAM SOFTWARE: The “Work Space.”
  108. Unit 74: OMEGA® 2013 CAD/CAM Software
  109. Unit 75: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  110. Unit 76: WELCOME TO MODULE TWO
  111. Unit 77: MODULE TWO LECTURE OUTLINE
  112. Unit 78: Foundations of CAD/CAM Technology for Orthotics and Prosthetics.
  113. Unit 79: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  114. Unit 80: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  115. Unit 81: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  116. Unit 82: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  117. Unit 83: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  118. Unit 84: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  119. Unit 86: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  120. Unit 87: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  121. Unit 88: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  122. Unit 89: MODULE THREE
  123. Unit 90: MODULE THREE
  124. Unit 91: MODULE THREE
  125. Unit 92: MODULE THREE
  126. Unit 93: MODULE THREE
  127. Unit 94: MODULE THREE
  128. Unit 95: module 3 activity 3 sample measurement sheet spinal TLSO original
  129. Unit 96: MODULE THREE
  130. Unit 97: module 3 activity 3 sample measurement sheet transfemoral original
  131. Unit 98: module 3 activity 3 sample measurement sheet transfemoral original(1)
  132. Unit 99: MODULE THREE
  133. Unit 100: MODULE THREE TUTORIAL VIDEO LIBRARY CHECKLIST
  134. Unit 101: FUNCTION OF THE MOUSE
  135. Unit 102: FOUNDATIONS of CAD/CAM DESIGN—MODIFICATION TECHNIQUES
  136. Unit 103: module 3 activity 5 observation rubric original
  137. Unit 104: WELCOME TO MODULE THREE
  138. Unit 105: MODULE THREE LECTURE OUTLINE
  139. Unit 106: Foundations of CAD/CAM Technology for Orthotics and Prosthetics
  140. Unit 107: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  141. Unit 108: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  142. Unit 109: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  143. Unit 110: Fabricating with Foam Models: Materials and Methods.
  144. Unit 111: Fabricating with Foam Models: Materials and Methods
  145. Unit 112: CENTRAL FABRICATION FACILITIES: AN OVERVIEW
  146. Unit 113: ADVANTAGES AND DISADVANTAGES OF USING CARVED MODELS FOR FABRICATION
  147. Unit 114: WELCOME TO MODULE FOUR
  148. Unit 115: MODULE FOUR LECTURE OUTLINE
  149. Unit 116: Foundations of CAD/CAM Technology for Orthotics and Prosthetics.
  150. Unit 117: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics
  151. Unit 118: Fundamentals of CAD/CAM Technology for Orthotics and Prosthetics (O&P)
  152. Unit 119: overview cad cam course design framework original